Fluid Lines
Fluid Line Assemblies & Tubing
Each polyethylene fluid line assembly is provided with a molded luer lock fitting on one or both ends. The assembly can be used with other standard luer lock connectors and will handle up to 100 psi (Pounds per Square Inch) working pressure.
All 951 Series fluid line assemblies are molded and have good chemical resistance to solvents, acids and resin fluids. The locking end accepts all standard dispensing needle tips and molded fittings. Have one of our knowledgeable staff help you place an order today.
Fluid Line - Male/None
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
951-6118-48 | .100 | .150 | 18 | 1 |
951-6124-48 | .100 | .150 | 24 | 1 |
951-6136-48 | .100 | .150 | 36 | 1 |
Fluid Line - Female/None
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
951-6218-48 | .100 | .150 | 18 | 1 |
951-6224-48 | .100 | .150 | 24 | 1 |
951-6236-48 | .100 | .150 | 36 | 1 |
Fluid Line - Male/Female
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
951-6318-48 | .100 | .150 | 18 | 1 |
951-6324-48 | .100 | .150 | 24 | 1 |
951-6336-48 | .100 | .150 | 36 | 1 |
Fluid Line - Female/Female
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
951-6418-48 | .100 | .150 | 18 | 1 |
951-6424-48 | .100 | .150 | 24 | 1 |
951-6436-48 | .100 | .150 | 36 | 1 |
Fluid Line - Male/Male
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
951-6524-48 | .100 | .150 | 24 | 1 |
Fluid Line - Male/Female - Black
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
952-6318-48 | .100 | .150 | 18 | 1 |
952-6336-48 | .100 | .150 | 36 | 1 |
Pinch Tubing
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
951-1000-48P | .125 | 10 | ||
951-1004-48P | .100 | 10 | ||
951-1006-48P | .100 | 10 | ||
951-2000-48P | .070 | 10 | ||
951-2002-48P | .100 | 10 | ||
951-2100-48P | .125 | 10 |
Tubing
Part Number | ID (in) |
OD (in) |
Length (in) |
Pkg Qty |
950-0249-52 | .167 | .125 | 1 | per/metre |